AUTHORISED DISTRIBUTOR IN UAE

Polyflex Group Pty Ltd is an Australian company and Turbomot is the authorised Distributor in UAE. Polyflex manufacturers engine mounting systems, Flexible Disc Couplings and Steel Shaft Couplings which are available with DNV type approval. We are proud to say that all our products are designed and manufactured in house.

Resilient mountings: Polyflex have over 1600 models of engine mount systems that cater for marine, defence, agricultural, mining, industrial & commercial applications. Our products are moulded from heat cured polymer alloys which are long lasting and oil / fuel resistant. We have a selection of core hardness's to meet every job requirement in the industry whether it be a light or heavy duty application.

Poly Flex engine mounts are specifically designed to provide vibration isolation for your machinery while also providing high resistance to movement caused by dynamic loads, such as propeller thrust and lateral loads experienced in marine applications.

Poly Flex model: P#7.5F73-11-16(50) shown application shown

Marine: Down-Angle

Manufactured from high strength engineering polymers that are resistant to most fuels, oils and chemicals.

Poly Flex uses a colour coding system to visually identify the hardness of each engine mount, that is:

  • Orange = 50 Shore Durometer Hardness(SDH) - 'A scale'
  • Blue = 60 SDH-A
  • Yellow = 70 SDH-A
  • Green = 80 SDH-A
  • Red = 90 SDH-A

With the growth of the Poly Flex business into Canada and USA we were requested to look at anti-vibration mounting systems for 12, 15, 18 and up to 32 and 34 litre engines to obtain improved results for reduction of harshness, noise and vibration plus increased stability of the machinery installation and this request has lead to the Ci Series of mounts.

Ci Series are based on inverted chevron infinite core (hence Ci Series) which incorporates all the designed attributes of the original Poly Flex marine mounts with fail safe as part of the build.

With more horsepower coming from less overall mass of modern high performance engines and with stronger and lighter boat building techniques this demanded new solutions.

Ci Series offers high performance mount systems for high performance engines in high performance boats.

These mounts suit large installations where placement of the engine and reduced but controlled engine movement under propeller loads, are very important.

The results are now starting to come in with boats in the water and the feedback from the builders is all positive and major orders are increasing with some of the largest boat builders in the world.

This series is normally supplied with a dark red base and the range of colour coded cores to indicate the Shore A durometer of the polymer core. This allows us to select a mount system to match the demands of the machinery, for best results. For large boat companies we also offer, to order, this series with a special custom white base to match the white engine room finish. (Large accounts only)

This Ci Series joins the CTF Series, the Y# Series and the SQ Base Series of Poly Flex anti-vibration mount that provide over 1700 to select from.

Flexible Disc Couplings: Designed to act as a dampner between gearbox and drive shaft while still maintaining strength, rigidity and performance. We have over 200 models (10 to 2000 HP) and are continually expanding our range.

Poly Flex flexible disc couplings are manufactured from high strength engineering polymers that are resistant to fuels and oils.

For further information and specifications on Poly Flex disc couplings please complete the following form, we will establish the coupling which is suitable for your application from the information supplied and fax/email information to you.

It should be noted that if your gearbox has any obstructions such as oil pumps, etc, near the output flange it may be necessary to fit an adaptor between the gearbox flange and the coupling.

It may be necessary that we contact you for more detailed information to make the most suitable coupling selection.

Poly Flex uses a colour coding system to visually identify the hardness of each coupling, that is:

  • Green = 80 Shore Durometer Hardness(SDH) - 'A scale'
  • Red = 90 SDH-A
  • Blue = 95 SDH-A

These mounts are ideal for Instrumentation, Computers or Hi-Fi systems

These mounts also have been used successfully under small water pumps and portable gensets.

All mounts have the option of stainless steel components, which are ideal for salt water pumps, desalinaters, air conditioning units, etc, etc.

Model No: Working Load(kg)* A B D E F H I K
RD3-50-6(50) 8.4-12.5 67 -- 6 50 M6 18 6 36
RD3-50-6(60) 10.6-16.0 67 -- 6 50 M6 18 6 36
EL2-50-6(50) 7.4-11.2 67 37 6 50 M6 18 6 36
EL2-50-6(60) 9.5-14.3 67 37 6 50 M6 18 6 36
RD3-65-6(50) 8.7-13.1 85 -- 6 65 M6 20 7 38
RD3-65-6(60) 11.0-16.5 85 -- 6 65 M6 20 7 38
EL2-65-6(50) 7.8-11.7 85 48.5 6 65 M6 20 7 38
EL2-65-6(60) 9.8-14.7 85 48.5 6 65 M6 20 7 38
RD3-75-8(50) 9.4-14.0 95 -- 6 75 M8 20 7 38
RD3-75-8(60) 12.4-18.6 95 -- 6 75 M8 20 7 38
EL2-75-8(50) 7.4-11.2 95 53 6 75 M8 20 7 38
EL2-75-8(60) 10.2-15.3 95 53 6 75 M8 20 7 38

Dimensions are in (mm).

Model No: values in () are Shore Durometer hardness - 'A scale'.

*Working Load stated are for the range between (2.0 to 3.0mm) static deflection.

The Poly Flex 'B-series' machinery mounts are manufactured from engineering grade polymers that are resistant to most fuels, oils and chemicals. (contact Poly Flex for chemical resistance table)

This model of mount is ideal for simple support or support/levelling of machinery.

table below shows a sample of the smaller mounts in the range.

The largest in the range has a diameter (A)=140mm with a working load of 2000kg.

The following table is a description of the B-series (small): contact Poly Flex for the complete data on the entire range.

Model No: Working Load (kg)* -Type(1)loading Working Load (kg)* -Type(2)Loading A B C D
B20-10(50) 20 20 20 10 30 M5
B20-10(60) 35 40 20 10 30 M5
B30-12(50) 40 50 30 12 32 M6
B30-12(60) 55 75 30 12 32 M6
B40-15(50) 50 60 40 15 35 M8
B40-15(60) 70 85 40 15 35 M8
B50-20(50) 60 65 50 20 45 M10
B50-20(60) 90 95 50 20 45 M10

Model No: values in() are Shore Durometer Hardness -'A' scale

*Working loads stated represent the load for 1.5mm static deflection per mount.

All dimensions are in (mm).

All the metal components are plated in Cobalt Zinc (SA5) which has very good wear and corrosion resistance.

CNC machined from CS1020 steel and gold passivated zinc plated,with models:

  • » pilot bored 16mm or 21mm
  • » parallel clamped/parallel bored 1" & 1 1/4"
  • » taper clamped/parallel bored 1" & 1 1/4

All the metal components are plated in Cobalt Zinc (SA5) which has very good wear and corrosion resistance.

This new system provides a means of supporting/tuning the deck structure to reduce the effects of vibration harmonics.

The design is comprised of:

  • » polymer flanges top and bottom
  • » ball and resilient socket joints, top and bottom, which allow a maximum of 15 degrees inclination each.
  • » a stainless steel adjusting stud and locking nuts
  • » the aluminium tube is supplied by the installer, as its length is application dependent.

Model: 'H/D 12.5' (1630kg working load @ 2mm deflection)

Model: 'H/D 6.8' (425kg working load @ 2mm deflection)

All metal components - 316 stainless steel

To minimise corrosion and to avoid any metal to metal contact, polymer bolt bushes are available.(see application sheet)

Other sizes and configurations are available, such as, square pattern 4-bolt isolator housings instead of the 2-bolt housings shown.